64
Tyros5 Owner’s Manual
3
3
Multi Pads
– Adding Musical Phrases to Your Performance –
The Multi Pads can be used to play a number of short pre-recorded
rhythmic and melodic sequences that can be used to add impact and
variety to your keyboard performances.
Multi Pads are grouped in Banks of four phrases each. The Tyros5 fea-
tures a variety of Multi Pad Banks in a variety of different musical
genres.
Moreover, the Audio Link Multi Pad function allows you to create a new pad
with your WAVE (Audio) data to play back during your performance.
1
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display, then select the desired bank.
Select pages using the [1
]–[6
] buttons that correspond to “P1, P2...” in the
display or pressing the MULTI PAD CONTROL [SELECT] button repeatedly,
then use the [A]–[J] buttons to select the desired bank.
2
Press any of the MULTI PAD CONTROL [1]–[4] buttons to play a
Multi Pad phrase.
The corresponding phrase (in this case, for Pad 1) starts playing back in its entirety
at the currently set tempo. You can play up to four Multi Pads at the same time.
3
Press the [STOP] button to stop playback of the Multi Pad(s).
If you want to stop specific pads, simultaneously hold down the [STOP] button
and press the pad(s) you wish to stop.
Playing the Multi Pads
1
1
There are two types of Multi Pad data.
Some types will play back once and
stop when they reach to the end. Others
will play back repeatedly.
Pressing the pad while it is playing back
stops playback and begins playing from
the top again.
• While the Style or MIDI Song is play-
ing back, pressing the MULTI PAD
button starts playback at the top of
the next bar. While the Style or MIDI
Song is stopping, pressing the
MULTI PAD button starts playback
immediately.
• STYLE CONTROL [START/STOP]
button flashes red at the downbeat.
NOTE
NOTE
NOTE
About the lamp status of the MULTI PAD CONTROL [1]–[4] buttons
•
Blue:
Indicates that the corresponding pad contains data (phrase).
•
Red:
Indicates that the corresponding pad is playing back.
•
Red (flashing):
Indicates that the corresponding pad is in standby (Synchro
Start). Refer to page 65 for using the Synchro Start function.
•
Off:
Indicates the corresponding pad contains no data and cannot be played.
Summary of Contents for Tyros5-76
Page 122: ...122 Tyros5 Owner s Manual MEMO...
Page 123: ...Tyros5 Owner s Manual 123 MEMO...
Page 124: ...124 Tyros5 Owner s Manual...
