Yamaha Tyros3, Owner'S Manual

Page: 89 / 120

10
10
C
onnections – U
sing
T
yr
os3 with O
ther D
evices –
Tyros3 Owner’s Manual •
89
Mixing the Sound of External Audio Devices with the Tyros3 Sound
The [LINE IN/MIC] jacks can be used either as LINE IN or MIC. The [L/L+R/MIC]
jack can be connected to any standard microphone or line-level source with a 1/4” phone
plug. By connecting an external audio source to the [R] and [L/L+R/MIC] jacks, you can
record that source along with your performance, using the Hard Disk Recorder function.
Connecting a source only to the [L/L+R/MIC] jack results in a mono input. Connecting
to both the [R] and [L/L+R/MIC] jacks (or only the [R] jack) results in a stereo input.
The TRIM control allows the input sensitivity of the MIC/LINE IN jacks to be adjusted
for optimum level matching with the connected equipment.
If you want to connect a Microphone or
guitar to the [LINE IN/MIC] jack, refer to
page 91.
When the sound of an external
device is output to the Tyros3, first
turn on the power to the external
device, then to the Tyros3.
Reverse this order when you turn
the power off.
NOTE
CAUTION
Synthesizer
Tone generator
Audio cable
Phone plug
(standard)
Pin plug
LINE OUT
[AUX IN/LOOP RETURN] and [AUX OUT/LOOP SEND] jacks
The [AUX OUT/LOOP SEND] jacks can be used either as AUX OUT or LOOP SEND, and can be selected
from the Function menu: [FUNCTION]
→
[I] UTILITY
→
TAB [ Q Q Q Q ][ W W W W ] CONFIG 2. The sound is output
at a fixed level, regardless of the [MASTER VOLUME] control setting. Use the [AUX OUT] jacks to output
the Tyros3 sound through an external audio system, or to record the sound with an external audio recorder.
Connect the [AUX OUT] jacks of the Tyros3 to the [AUX IN] jacks of the audio system using appropriate
audio cables. When these are used as LOOP SEND jacks, you can route the output of the Tyros3 to an exter-
nal signal processor, and return the processed signal back to the instrument via the [AUX IN/LOOP
RETURN] jacks—letting you apply your own favorite effects to the overall sound.
The TRIM control allows the input sensitivity of the AUX IN [L/L+R] and [R] (LOOP RETURN) jacks to
be adjusted for optimum level matching with the connected equipment.
Example of Loop Send
Audio
cable