Yamaha TW125 1999, Service Manual

Page: 180 / 283

6-4
FRONT WHEEL AND BRAKE DISC
CHAS
NOTE:
2 Nm (0.2 m kg)
NOTE:
1.5 Nm (0.15 m kg)
WARNING
3. Check:
spokes
Bends / damage
Replace.
Loose Tighten.
Tap the spokes with a screwdriver.
A tight spoke will emit a clear, ringing tone, a
loose spoke will sound flat.
4. Tighten:
spokes
After tightening the spokes, measure the front
wheel runout.
5. Measure:
front wheel radial runout
a
front wheel lateral runout b
Over the specified limits Replace.
Front wheel radial runout limit
2 mm
Front wheel lateral runout limit
2 mm
6. Check:
collars
Damage / wear
Replace.
Tire valve stem locknut
After mounting a new tire, ride conserva-
tively for a while to become accustomed to
the “feel” of the new tire and to allow the
tire to seat itself properly in the rim. Failure
to do so could lead to an accident with pos-
sible injury to the rider or damage to the
motorcycle.
After a tire has been repaired or replaced,
be sure to tighten the tire valve stem lock-
nut
1 to specification.