Yamaha TW125 1999, Service Manual

Page: 16 / 283

1-5
SPECIAL TOOLS
GEN
INFO
EAS00020
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools; this will help prevent damage caused by the use of inappropriate tools or
improvised techniques.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No. Tool name / Usage Illustration
90890-01080
90890 -04052
Rotor puller
Attachment
These tools are used when removing the
generator rotor.
90890-01083
90890 -01084
Rocker arm shaft puller bolt
Weight
These tools are used when removing or
installing the rocker arm shafts.
90890-01268 Ringnut wrench
This tool is used to loosen and tighten the ex-
haust and steering ringnut.
90890-01294
90890 -01326
Damper rod holder
T-handle
This tool is used for disassembling or assem-
bling the front fork
90890-01311 Valve adjusting tool
This tool is necessary for adjusting valve
clearance.
90890-01312 Fuel level gauge
This gauge is used to measure the fuel level
in the float chamber.
90890-01367
90890 -01368
Fork seal driver weight
Fork seal driver attachment (ø33 mm)
This tool is used when installing the fork seal.
90890-01403 Ring nut wrench
This tool is used to loosen and tighten the
steering ring nut.
90890-01701 Sheave holder
This tool is used for holding the generator
rotor