Yamaha TT-R90E, Owner'S Service Manual

Page: 144 / 340

3 - 14
INSP
ADJ
4. To stiffen the spring preload, install the
circlip 1 into the groove
a
. To soften the
spring preload, install the circlip into the
groove
b
.
NOTE:
Do not spread the circlip too much.
5. Install:
●
Spring guide 1
NOTE:
While compressing the spring, install the
spring guide.
Standard installation position:
Groove
b
6. Install:
●
Rear shock absorber
Refer to “SWINGARM” section in the
CHAPTER 5.
EC36Q000
TIRE PRESSURE CHECK
1. Measure:
●
Tire pressure
Out of specification
→
Adjust.
NOTE:
●
Check the tire while it is cold.
●
Loose bead stoppers allow the tire to slip off
its position on the rim when the tire pressure
is low.
●
A tilted tire valve stem indicates that the tire
slips off its position on the rim.
●
If the tire valve stem is found tilted, the tire is
considered to be slipping off its position. Cor-
rect the tire position.
Standard tire pressure:
100 kPa (1.00 kgf/cm
2
, 14.5 psi)
TIRE PRESSURE CHECK