Yamaha TT-R230X 2007 Owner'S Manual Download

Page: 46 / 79

6-12

PERIODIC MAINTENANCE AND MINOR REP

PERIODIC MAINTENANCE AND MINOR REPAIR

AIR

3. Remove the wing nut, washer, air

filter element, air filter guide from
the air filter element frame.

1. Wingnut
2. Washer
3. Air filter element
4. Air filter guide

4. Clean the air filter element with

solvent, and then squeeze the
remaining solvent out.

5. Apply oil of the recommended type

to the entire surface of the air filter
element, and then squeeze the
excess oil out.

The air filter element should be wet but
not dripping.

Recommended oil:

Yamaha foam air filter oil or other
quality air filter oil

6. Install the air filter guide, air filter

element, washer, wing nut onto the
frame, insert into the air filter case.

Make sure that the air filter

Make sure that the air filter
element is properly seated in the

element is properly seated in the

element is properly seated in the
air filter case.

air filter case.

The engine should never be

The engine should never be
operated without the air filter

operated without the air filter

operated without the air filter
element installed, otherwise the

element installed, otherwise the

element installed, otherwise the
piston(s) and/or cylinder(s) may

piston(s) and/or cylinder(s) may

piston(s) and/or cylinder(s) may
become excessively worn.

become excessively worn.

7. Install the panel.

Summary of Contents for TT-R230X 2007
















































































Search results

Summary of Contents for TT-R230X 2007

Reviews:

Related manuals for TT-R230X 2007

Brands by name

Popular brands

Yamaha TT-R230X 2007, Owner'S Manual

Search results

Summary of Contents for TT-R230X 2007

Reviews:

Related manuals for TT-R230X 2007

Brands by name

Popular brands