Yamaha TT-R230X 2007 Owner'S Manual Download

Page: 59 / 79

6-25

PERIODIC MAINTENANCE AND MINOR REP

PERIODIC MAINTENANCE AND MINOR REPAIR

AIR

If any damage is found or the front

If any damage is found or the front
fork does not operate smoothly

fork does not operate smoothly

fork does not operate smoothly, have

, have

a Y

a Yamaha dealer check or repair it.

amaha dealer check or repair it.

Checking the steering

Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.

1. Place a stand under the engine to

raise the front wheel off the ground.

Securely support the motorcycle so

Securely support the motorcycle so
that there is no danger of it falling

that there is no danger of it falling

that there is no danger of it falling
over

over

over.....

2. Hold the lower ends of the front fork

legs and try to move them forward
and backward. If any free play can
be felt, have a Yamaha dealer
check or repair the steering.

Summary of Contents for TT-R230X 2007
















































































Search results

Summary of Contents for TT-R230X 2007

Reviews:

Related manuals for TT-R230X 2007

Brands by name

Popular brands

Yamaha TT-R230X 2007, Owner'S Manual

Search results

Summary of Contents for TT-R230X 2007

Reviews:

Related manuals for TT-R230X 2007

Brands by name

Popular brands