Yamaha TT-R110E(Z) Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 84

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-28

7

4. Connect the battery coupler.
5. Turn the key to “ON”.
6. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

EAU24350

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.

To service the front wheel

1. Stabilize the rear of the motorcycle

by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.

2. Raise the front wheel off the

ground by using a motorcycle
stand.

To service the rear wheel

Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing

a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.

Specified fuse:

10.0 A

U5B682E0.book Page 28 Tuesday, June 9, 2009 2:04 PM

«
...
66
67
68
69
70
...
»

Summary of Contents for TT-R110E(Z)





















































































Reviews:

No comments

Related manuals for TT-R110E(Z)

Brand: AJP Pages: 191

Brand: yasuni Pages: 8

Brand: hepco & becker Pages: 4

Brand: KTM Pages: 38

Brand: KSR Moto Pages: 51

Brand: hepco & becker Pages: 4

GM STAR 250 1986

Brand: Maico Pages: 32

Brand: Yamaha Pages: 248

Brand: Yamaha Pages: 86

Brand: Pacific Helmets Pages: 48

Brand: HYOSUNG Pages: 101

Brand: N-Com Pages: 28

Brand: Honda Pages: 89

Brand: hepco & becker Pages: 2

PEGASO 650 - 2009

Brand: APRILIA Pages: 60

Brand: Hobart Pages: 20

Brand: obbo med Pages: 6

Brand: Honda Pages: 164

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands