Yamaha TT-R110E(Z) Owner'S Manual Download Page 37

Page: 37 / 84

OPERATION AND IMPORTANT RIDING POINTS

6-1

EAU15951

Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.

WARNING

EWA10271

Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

EAU44813

Starting and warming up a
cold engine

1. Turn the fuel cock lever to “ON”.
2. Turn the key to “ON” and make

sure that the engine stop switch is
set to “

”.

3. Shift the transmission into the neu-

tral position.

WARNING

EWA14410

●

Be sure to shift the transmis-
sion into neutral before starting
the engine.

●

Never ride with the sidestand
down.

4. Turn the starter (choke) on and

completely close the throttle. (See
page 4-6.)

5. Start the engine by pushing the

start switch or by pushing the kick-
starter lever down.

NOTICE:

For

maximum engine life, never ac-
celerate hard when the engine is
cold!

[ECA11041]

6. When the engine is warm, turn the

starter (choke) off.

TIP

The engine is warm when it responds
quickly to the throttle with the starter
(choke) turned off.

U5B682E0.book Page 1 Tuesday, June 9, 2009 2:04 PM

Summary of Contents for TT-R110E(Z)





















































































Search results

Summary of Contents for TT-R110E(Z)

Reviews:

Related manuals for TT-R110E(Z)

Brands by name

Popular brands

Yamaha TT-R110E(Z), Owner'S Manual

Search results

Summary of Contents for TT-R110E(Z)

Reviews:

Related manuals for TT-R110E(Z)

Brands by name

Popular brands