Setting the dynamic range compression level
Compressing the dynamic range of audio signals (the volume difference between the loudest and quietest
sounds) makes it easier to listen at a low volume. This setting is applied only when Dolby Digital audio
signals are being played.
Default setting: No compression
1
Turn off the sound bar.
2
Press the following remote control buttons according to the compression level you
want to set:
Compression level
Function
Buttons to press
(On the remote control, press the
buttons in order within three
seconds)
Auto
Apply an amount of dynamic range
compression well suited for a typical room.
[STEREO] → [] → [
z
(Power)]
Compression
Apply the maximum amount of dynamic
range compression.
[STEREO] → [VOLUME -] → [
z
(Power)]
No compression
Dynamic range compression is not applied.
[STEREO] → [
|
(Mute)] → [
z
(Power)]
The dynamic range compression level setting is changed.
The indicators on the front of the sound bar show the setting status as follows, and the sound
bar is turned on.
Compression level
Sound bar’s indicators
Auto
Indicators not glowing
Compression
Glows
No compression
Glow
70
CONFIGURATION > Setting the dynamic range compression level