Connecting to power
After connecting to the TV and AV devices, connect the sound bar and subwoofer to power.
To an AC wall outlet
Power cord (included)
Sound bar (rear)
CONNECT
STANDBY
SETUP
UPDATE ONLY
To an AC wall outlet
Power cord (included)
Subwoofer (rear)
After connecting the power, some of the indicators on the front of the sound bar flash for approximately one
minute as follows, and then turn off.
Make sure that the indicators on the front of the sound bar are turned off and the CONNECT indicator on the
rear of the subwoofer is glowing before turning on the sound bar.
Next steps
(
“Preparing the remote control” (p.36)
Related links
“Turning on and off the sound bar” (p.37)
35
PREPARATION > Connecting to power
