Safety information
2-5
2
may not be appropriate. Refer to page
7-15 for tire specifications and more in-
formation on replacing your tires.
Transportin
g
the Motorcycle
Be sure to observe following instruc-
tions before transporting the motorcy-
cle in another vehicle.
z
Remove all loose items from the
motorcycle.
z
Point the front wheel straight
ahead on the trailer or in the truck
bed, and choke it in a rail to pre-
vent movement.
z
Secure the motorcycle with tie-
downs or suitable straps that are
attached to solid parts of the mo-
torcycle, such as the frame or up-
per front fork triple clamp (and not,
for example, to rubber-mounted
handlebars or turn signals, or
parts that could break). Choose
the location for the straps carefully
so the straps will not rub against
painted surfaces during transport.
z
The suspension should be com-
pressed somewhat by the tie-
downs, if possible, so that the mo-
torcycle will not bounce exces-
sively during transport.
EAU57610
Further safe-ri
d
in
g
points
z
Be sure to signal clearly when
making turns.
z
Braking can be extremely difficult
on a wet road. Avoid hard braking,
because the motorcycle could
slide. Apply the brakes slowly
when stopping on a wet surface.
z
Slow down as you approach a
corner or turn. Once you have
completed a turn, accelerate
slowly.
z
Be careful when passing parked
cars. A driver might not see you
and open a door in your path.
z
Railroad crossings, streetcar rails,
iron plates on road construction
sites, and manhole covers be-
come extremely slippery when
wet. Slow down and cross them
with caution. Keep the motorcycle
upright, otherwise it could slide
out from under you.
z
The brake pads or linings could
get wet when you wash the motor-
cycle. After washing the motorcy-
cle, check the brakes before
riding.
UB6FE0E0.book Page 5 Friday, August 11, 2017 3:37 PM
