Yamaha T115FL-2 Owner'S Manual Download

Page: 26 / 80

Instrument an

control functions

4-7

3. Wipe up any spilled fuel immedi-

ately.

NOTICE:

Imme

iately

wipe off spille

fuel with a clean,

ry, soft cloth, since fuel may

eteriorate painte

surfaces or

plastic parts.

[ECA10072]

4. Be sure to securely close the fuel

tank cap.

WARNING

EWA15152

Gasoline is poisonous an

can

cause injury or

eath. Han

aso-

line with care. Never siphon

asoline

y mouth. If you shoul

swallow

some

asoline or inhale a lot of

as-

oline vapor, or

et some

asoline in

your eyes, see your

octor imme

ately. If

asoline spills on your skin,

wash with soap an

water. If

aso-

line spills on your clothin

, chan

your clothes.

EAUU1930

TIP

This model is equipped with the
Flex Fuel technology. It is possible
to blend gasoline and gasohol (up
to E85) in any proportion.

When the vehicle will be used in
ambient temperatures under 15
°C, use gasoline or gasohol of E20
or less to promote better engine
starts.

NOTICE

ECAT1300

Use only the recommen

fu-

el. The use of lea

asoline

will cause severe

ama

e to in-

ternal en

ine parts, such as the

valves an

piston rin

s, as well

as to the exhaust system.

When refuelin

with a

ifferent

type of fuel than is in the fuel
tank, the Flex Fuel system
nee

s time to reco

nize the

new fuel. Ri

e with caution for

the first several minutes after
switchin

fuels

ecause the en-

ine may hesitate.

1. Fuel tank filler tube
2. Maximum fuel level

Recommen

fuel:

Regular unleaded gasoline, gaso-
hol (up to E85 acceptable)

Fuel tank capacity:

4.0 L (1.1 US gal, 0.9 Imp.gal)

UB6FE0E0.book Page 7 Friday, August 11, 2017 3:37 PM

Summary of Contents for T115FL-2

















































































Search results

Summary of Contents for T115FL-2

Reviews:

Related manuals for T115FL-2

Brands by name

Popular brands

Yamaha T115FL-2, Owner'S Manual

Search results

Summary of Contents for T115FL-2

Reviews:

Related manuals for T115FL-2

Brands by name

Popular brands