Yamaha T115FL-2 Owner'S Manual Download

Page: 20 / 80

Instrument an

control functions

4-1

EAUU0352

Main switch/steerin

lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, and is used
to open the seat also. The various main
switch positions are described below.

TIP

The main switch is equipped with a
keyhole cover. (See page 4-2 for key-
hole cover opening and closing proce-
dures.)

EAU10641

All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.

TIP

The headlight, meter lighting and tail-
light come on automatically when the
engine is started.

EAU10662

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10062

Never turn the key to “OFF” or
“LOCK” while the vehicle is movin

Otherwise the electrical systems will

e switche

off, which may result in

loss of control or an acci

ent.

EAUU1043

LOCK

The steering is locked, and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF”

position, and then turn it to
“LOCK” while still pushing it.

3. Remove the key.

TIP

If the steering will not lock, try turning
the handlebars back to the right slight-
ly.

UB6FE0E0.book Page 1 Friday, August 11, 2017 3:37 PM

Summary of Contents for T115FL-2

















































































Search results

Summary of Contents for T115FL-2

Reviews:

Related manuals for T115FL-2

Brands by name

Popular brands

Yamaha T115FL-2, Owner'S Manual

Search results

Summary of Contents for T115FL-2

Reviews:

Related manuals for T115FL-2

Brands by name

Popular brands