background image

STAGEPAS 200BTR STAGEPAS 200 Owner’s Manual

28

„

Notice regarding the software license

Software used in this product includes software that complies 
with the license agreement by Analog Devices, Inc.
This license is a type of software license that authorizes 
redistribution of the software program under and subject to clear 
indication that no guarantee is provided, and publication of the 
copyright declaration and the license terms.
The following paragraphs are published subject to the said 
license terms, and do not stipulate any restriction with regard to 
your usage of this product.

Copyright © 2019 Analog Devices, Inc.  All rights reserved.

Redistribution and use in source and binary forms, with or 
without modification, are permitted provided that the following 
conditions are met:
• Redistributions of source code must retain the above 

copyright notice, this list of conditions and the following 
disclaimer.

• Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions and the following 
disclaimer in the documentation and/or other materials 
provided with the distribution.

• Modified versions of the software must be conspicuously 

marked as such.

• This software is licensed solely and exclusively for use with 

processors/products manufactured by or for Analog Devices, 
Inc.

• This software may not be combined or merged with other 

code in any manner that would cause the software to become 
subject to terms and conditions which differ from those listed 
here.

• Neither the name of Analog Devices, Inc. nor the names of its 

contributors may be used to endorse or promote products 
derived from this software without specific prior written 
permission.

• The use of this software may or may not infringe the patent 

rights of one or more patent holders.  This license does not 
release you from the requirement that you obtain separate 
licenses from these patent holders to use this software.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. 
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL ANALOG DEVICES, INC. OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF 
INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.

2019-01-10-7CBSD SLA

Summary of Contents for STAGEPAS 200





























Reviews: