STAGEPAS 200BTR STAGEPAS 200 Owner’s Manual
21
Controlling the Unit from STAGEPAS Controller
You can control the parameters and view the meters and clipping information of this product from your Bluetooth-
enabled device, such as a smartphone or tablet.
For more information on how to use STAGEPAS Controller, please refer to the “STAGEPAS Controller User Guide.”
Connecting STAGEPAS
Controller
To control the unit in this way, you first need to connect a
device on which STAGEPAS Controller has been installed.
Alternatively, you can control the unit from a device that is
different than the one connected for Bluetooth Audio.
1
Start STAGEPAS Controller.
2
When the DEVICE LIST screen appears, tap
the name of the STAGEPAS that you want
to control.
The name of the target STAGEPAS will be highlighted.
NOTE
If you do not see the desired device on the list, press the
refresh button to search for the device again.
3
Tap “Connect.”
Press the Bluetooth button on this product only if this is
the first time you connect it to STAGEPAS Controller.
You also need to set up the initial password. (This
process is required for connection.)
NOTE
When you reconnect your Bluetooth device, you do not need to
follow steps 2 and 3 above.
Disconnecting STAGEPAS
Controller
1
Display the DEVICE LIST screen on
STAGEPAS Controller.
The name of the target STAGEPAS will be highlighted.
2
Tap “Disconnect.”
The mixer parameters will maintain the values specified
via STAGEPAS Controller.
Maintaining the STAGEPAS
Controller settings
1
To maintain the values specified via
STAGEPAS Controller, set LAST MEMORY
RESUME to ON.
ON:
If the power to the unit is turned off and then back
on, the unit will maintain the previous settings.
However, the parameter values will not match the
position of the controllers on the panel.
OFF:
If the power to the unit is turned off and then back
on, the settings will be initialized. The parameter values
will match the position of the controllers on the panel.
