- 12 -
6. Sensor Unit Adjustment
-Key sensor unit adjustment
(Adjustment is required when the unit is replaced.)
Adjust the gap between the bottom surface of a
black key and upper surface of the key sensor unit
when depressing the black key to the lowest point.
Adjustment specification : 3.8mm to 4.0mm
Adjustment spots : Sensor brackets: 4
Adjustment screws: 2 each
Adjust from the bottom of the
keyboard with 2 adjustment
screws to make a gap of
appropriate size.
Make sure the gap between the
keyboard and Key sensor rail is
parallel.
-Pedal sensor unit adjustment
Damper pedal detection position adjustment shall be done in the maintenance mode by
confirming the buzzer sounds. See the maintenance mode.
⇒
P.13, 14
Shift pedal sensor detection position adjustment shall be done with the test mode
buzzer sounding positions. See the test mode.
⇒
P.14, 15
ａ
Fig.17
Fig.18
