Working with Projects
49
SREV1—Owner’s Manual
Saving Projects
Projects, which consist of all the Quick memory programs and the current program set-
tings, can be saved to the following drives: Internal Card or PC Card.
1
Use the [PROGRAM] button to locate the Project page.
2
Use the cursor buttons to select a drive button, and then press [ENTER] to
make it the active drive.
The projects already stored on the active drive appear in the project list.
3
Use the cursor buttons to select the SAVE button, and then press [ENTER].
The Title Edit dialog box appears.
4
Enter a title.
See “Using the Title Edit dialog Box” on page 41 for more information.
5
Use the cursor buttons to select the OK button, and then press [ENTER].
(To cancel the operation, select the CANCEL button and then press [ENTER].)
If a project with the same title already exists, a confirmation dialog box appears. Select
YES to overwrite the existing project, or select NO to cancel the operation. Note that if
the existing project is write-protected it cannot be overwritten.
The project is saved to the selected drive.
Editing Project Titles
The titles of projects stored on the following drives can be edited: Internal Card or PC
Card.
1
Use the [PROGRAM] button to locate the Project page.
2
Use the cursor buttons to select a drive button, and then press [ENTER] to
make it the active drive.
The projects stored on the active drive appear in the project list.
3
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a project.
The titles of write-protected projects cannot be edited.
4
Use the cursor buttons to select the TITLE EDIT button, and then press
[ENTER].
The Title Edit dialog box appears.
5
Edit the title.
See “Using the Title Edit dialog Box” on page 41 for more information.
6
Use the cursor buttons to select the OK button, and then press [ENTER].
(To cancel the operation, select the CANCEL button and then press [ENTER].)
The new title is saved.
