Working with Quick Memories
43
SREV1—Owner’s Manual
Storing Programs
The current program can be stored to any Quick memory.
1
Use the [PROGRAM] button to locate the Program page.
2
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a Quick
memory.
Programs cannot be stored to Quick memories containing write-protected programs.
3
Use the cursor buttons to select the STORE button, and then press [ENTER].
The Title Edit dialog box appears.
4
Enter a title.
See “Using the Title Edit dialog Box” on page 41 for more information.
5
Use the cursor buttons to select the OK button, and then press [ENTER].
(To cancel the operation, select the CANCEL button and then press [ENTER].)
The current program is stored to the selected Quick memory, and the Edit status indi-
cator disappears (see page 18).
Editing Program Titles
The titles of programs already stored in the Quick memories can be edited as follows.
1
Use the [PROGRAM] button to locate the Program page.
2
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a pro-
gram.
The titles of write-protected programs cannot be edited.
3
Use the cursor buttons to select the TITLE EDIT button, and then press
[ENTER].
The Title Edit dialog box appears.
4
Edit the title.
See “Using the Title Edit dialog Box” on page 41 for more information.
5
Use the cursor buttons to select the OK button, and then press [ENTER].
(To cancel the operation, select the CANCEL button and then press [ENTER].)
Note that the “CHANGING TITLE...” message does not appear in this case.
The new title is stored.
