53
En
Using audio features
BA
S
IC
OPERA
T
ION
English
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
This operation will override the level adjustments made in
“Optimizing the speaker setting for your listening room” (see
page 37) and “SPEAKER LEVEL” (see page 82).
1
Press
2
LEVEL
on the remote control
repeatedly to select the speaker you want to
adjust.
y
• Once you press
2
LEVEL
on the remote control, you can
also select the speaker by pressing
3
k
/
n
.
• Instead of “SB R” and “SB L”, “SB” is displayed if “SUR.
B L/R SP” is set to either “SMLx1” or “LRGx1” (see
page 81).
2
Press
3
l
/
h
on the remote control to
adjust the speaker output level.
• Press
3
h
to increase the value.
• Press
3
l
to decrease the value.
Control range: –10.0 dB to +10.0 dB
You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press
N
STEREO
on the remote control
repeatedly to select “2ch Stereo”.
y
• You can use a subwoofer with this program when “LFE/BASS
OUT” is set to “SWFR” or “BOTH” (see page 80).
• You can also select the “2ch Stereo” mode by rotating the
N
PROGRAM
selector on the front panel.
• See page 72 for details about the parameters of the “2ch Stereo”
mode.
Before performing the following operation, set the operation
mode selector on the remote control to
C
AMP
.
Adjusting the speaker level
Note
Display
Adjusted speaker
FRONT L
Front left speaker
CENTER
Center speaker
FRONT R
Front right speaker
SUR.R
Surround right speaker
SB R
Surround back right speaker
SB L
Surround back left speaker
SUR.L
Surround left speaker
SWFR
Subwoofer
PRNS L
Presence left speaker
PRNS R
Presence right speaker
Enjoying multi-channel sources in
2-channel stereo
