Yamaha RXV1800BL Owner'S Manual Download Page 37

Page: 37 / 157

Connections

PRE

ARA

ION

English

Make sure this unit is turned off.

Press and hold

STRAIGHT

on the front

panel and then press

MASTER ON/OFF

inward to the ON position to turn on this unit.

This unit turns on, and the advanced setup menu
appears in the front panel display.

Rotate the

PROGRAM

selector to select

“SPEAKER IMP.”.

Press

STRAIGHT

repeatedly to select

“6

Ω

MIN”.

Press

MASTER ON/OFF

to release it

outward to the OFF position to save the new
setting and turn off this unit.

The setting you made is reflected next time you turn on this unit.

■

Turning on this unit

Press

MASTER ON/OFF

on the front panel

inward to the ON position to turn on this unit.

When you turn on this unit by pressing

MASTER ON/

OFF

, the main zone is turned on.

When you turn on this unit, there will be a delay for a few
seconds before this unit can reproduce sound.

■

Turning off this unit

Press

MASTER ON/OFF

on the front panel

again to release it outward to the OFF position to
turn off this unit.

•

MAIN ZONE ON/OFF

on the front panel as well as

POWER

and

STANDBY

on the remote control are

operational only when

MASTER ON/OFF

is pressed

inward to the ON position.

• Basically, we recommend that you use the standby mode to turn

off this unit.

■

Set the main zone to the standby mode

Press

MAIN ZONE ON/OFF

(or

STANDBY

)

to set the main zone to the standby mode.

In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.

■

Turning on the main zone from the
standby mode

Press

MAIN ZONE ON/OFF

(or

POWER

) to

turn on the main zone.

• When you turn on this unit, there will be a delay for a few

seconds before this unit can reproduce sound.

• These buttons are operational only when

MASTER ON/

OFF

is pressed inward to the ON position.

Setting the speaker impedance

Caution

If you are to use 6 ohm speakers, set “SPEAKER
IMP.” to “6

Ω

MIN” as follows BEFORE using this

unit. You can also use 4 ohm speakers as the front
speakers.

Note

EFFECT

STRAIGHT

MASTER

While holding

down

Turning this unit on and off

Notes

If there are some problems...

• First, turn off and then turn on this unit again.
• If problems persist, initialize the parameters of this

unit. See page 129 for details.

Summary of Contents for RXV1800BL






























































































































































Search results

Summary of Contents for RXV1800BL

Reviews:

Related manuals for RXV1800BL

Brands by name

Popular brands

Yamaha RXV1800BL, Owner'S Manual

Search results

Summary of Contents for RXV1800BL

Reviews:

Related manuals for RXV1800BL

Brands by name

Popular brands