Yamaha RX-V467 Owner'S Manual Download Page 54

Page: 54 / 113

SETUP

Setting various functions (Setup menu)

■

Auto-adjusting Dolby Digital and DTS
dynamic range

Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.

■

Setting the maximum volume

Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.

■

Setting the startup volume

Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode.

Setting HDMI functions

HDMI Setup submenu

D.Range

Min/Auto

(Min) Sets the dynamic range suitable for low volume

or a quiet environment, such as at night, for bitstream

signals except for Dolby TrueHD signals.

(Auto) Adjusts the dynamic range for Dolby TrueHD

signals based on input signal information.

STD

Adjusts the dynamic range for optimum volume for

regular home use.

Max

(Default)

Produces audio without adjusting the dynamic range.

Max Volume

Adjustable range

-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)

Default setting

+16.5 dB

Adjustment

increments

5.0 dB

Init Volume

Adjustable range

Off, Mute, -80 dB to +16.5 dB

Default setting

Off

Adjustment

increments

0.5 dB

Control

Turns the HDMI Control on or off.

TVAudio

Chooses automatically selected audio input in

conjunction with TV operation when the HDMI

Control is turned on.

ReturnChan

Transmits audio/video output to the TV and audio

input from the TV through a single HDMI cable.

Standby

Selects whether HDMI audio/video signals will be

continue to be produced when this unit is on

standby.

Audio

Selects the audio output device connected to this

unit via HDMI jacks.

SW
C

L
SL

;

HDMISetup

SETUP

VOL.

1 :

When you set the “Max Volume” at a lower level than “Init Volume,” the “Max
Volume” setting has priority.

2 :

This menu item appears depending on the “Control” setting.

Summary of Contents for RX-V467

















































































































Search results

Summary of Contents for RX-V467

Reviews:

Related manuals for RX-V467

Brands by name

Popular brands

Yamaha RX-V467, Owner'S Manual

Search results

Summary of Contents for RX-V467

Reviews:

Related manuals for RX-V467

Brands by name

Popular brands