Yamaha RX-V467, Owner'S Manual

Page: 51 / 113

En
51
SETUP
Setting various functions (Setup menu)
■
Controlling the volume of each speaker
Separately adjusts the volume of each speaker. Use
j
Cursor
B
/
C
to select the desired speaker and adjust the volume with
j
Cursor
D
/
E
.
■
Manually setting speaker distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
Use
j
Cursor
B
/
C
to display “Unit,” and then use
j
Cursor
D
/
E
to choose the units of length (meters or feet).
Setting distances for each speaker
Use
j
Cursor
B
/
C
to display the speaker you want to configure,
and then use
j
Cursor
D
/
E
to set the distance from the speaker
to your listening position.
■
Adjusting sound quality with the equalizer
Adjusts sound quality of tone using a parametric or graphic
equalizer.
EQ Select
Select an equalizer type.
Level
FL
Front speaker L
FR
Front speaker R
C
Center speaker
SL
Surround speaker L
SR
Surround speaker R
SBL
Surround back L
SBR
Surround back R
SB J
1 Surround back
SWFR
Subwoofer
Adjustable range
-10.0 dB to +10.0 dB
Default setting 0 dB (FL/FR/SWFR)
-1.0 dB (C/SL/SR/SBL/SBR/SB)
Adjustment
increments
0.5 dB
Distance
Unit
Selects the distance unit (meters or feet).
Front L
Front speaker L
Front R
Front speaker R
Center
Center speaker
Sur. L
Surround speaker L
Sur. R
Surround speaker R
Sur. B L Surround back speaker L
Sur. B R
Surround back speaker R
Sur. B
J
1 Surround back speaker
SWFR
Subwoofer
Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)
Default setting
3.00 m (10.0 ft) (Front L/Front R/SWFR)
2.60 m (8.5 ft) (Center)
2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)
Adjustment
increments
0.10 m (0.5 ft)
Equalizer
PEQ
Uses the parametric equalizer to adjust sound quality.
Selecting this setting applies the tone settings
obtained using YPAO (
☞
p. 23 ).
J
2
GEQ
(Default) Uses the graphic equalizer to adjust sound quality. By
pressing
j
ENTER , you can adjust the
characteristics of the graphic equalizer.
Off
Disables the equalizer.
J J
1 :
“SB” and “Sur.B” is displayed when using a 6.1 channel configuration only.
J
2 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.
“PEQ” does not appear if the measurement process has not been carried out at
least once.