Yamaha RX-V3085, Owner'S Manual

Page: 124 / 190

En
124
Sound
Information Displays information about the current audio signal. 133
Lipsync
Delay Enable Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. 133
Auto/Manual Select
Selects the method to adjust the delay between video and audio output. 133
Adjustment Adjusts the delay between video and audio output manually. 134
DSP Parameter
DSP Level Adjusts the sound field effect level. 134
Initial Delay Adjusts the delay between the direct sound and presence sound field generation. 134
Room Size Adjusts the broadening effect of the presence sound field. 134
Liveness Adjusts the loss of the presence sound field. 134
Reverb Time Adjusts the decay time of the rear reverberant sound. 134
Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 135
Reverb Level Adjusts the volume of the reverberant sound. 135
Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation. 135
Surround Room Size
Adjusts the broadening effect of the surround sound field. 135
Surround Liveness Adjusts the loss of the surround sound field. 135
Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation. 135
Surround Back Room Size Adjusts the broadening effect of the surround back sound field. 135
Surround Back Liveness Adjusts the loss of the surround back sound field. 136
Surround Decoder
Decode Type Selects a surround decoder to be used. 136
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. 136
Center Image Adjusts the center localization (broadening effect) of the front sound field. 136
9ch Stereo
Level Adjusts the entire volume. 136
Front / Rear Balance Adjusts the front and rear volume balance. 136
Left / Right Balance Adjusts the left and right volume balance. 136
Height Balance Adjusts the height volume balance using the presence speakers. 136
Monaural Mix Enables/disables monaural sound output. 137
Reset Restores all default settings. 137
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 137
Volume
Max Volume Sets the limit value of the volume. 137
Initial Volume Sets the initial volume for when this receiver is turned on. 137
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 137
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. 137
Virtual Speaker
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 138
VSBS Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 138
Ultra Low Jitter PLL Mode (RX-V3085 only) Enables/disables the jitter elimination function. 138
DAC Digital Filter (RX-V3085 only) Selects the digital filter type of the audio DAC (digital-to-analog converter). 138
Balance Input Attenuator (RX-V3085 only) Selects whether to activate the attenuator for the balance input to avoid sound distortion. 138
Menu Item Function Page