En
133
Sound
Configures the audio output settings.
■
Information
Displays information about the current audio signal.
Choices
X
Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the
specifications and settings of the playback device.
■
Lipsync
Adjusts the delay between video and audio by holding up the audio output.
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
AV 1-7, AUX, AUDIO 1-4*
* AUDIO 4: RX-V3085 only
Settings
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
Y
Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV
connected to the unit. In this case, adjust the delay manually in “Adjustment”.
Input
Format
Audio format of the input signal
Channel
The number of source channels in the input signal
(front/surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front channels,
2 surround channels, and LFE).
(When DTS:X content is played back)
For example, “7.1.4” denotes “standard 7.1-channel plus 4 for
overhead speaker channels”.
Sampling
The number of samples per second of the input digital signal
Dialogue
The dialogue normalization level of the input bitstream signal
Output
Channel
The number of signal output channels (for example, “5.1.2”
denotes “standard 5.1-channel plus 2 for overhead speaker
channels”) and the speaker terminals from which signals are
output
Disable
Disable the Lipsync adjustment for the selected input source.
Enable
Enables the Lipsync adjustment for the selected input source.
Auto
Adjusts the delay between video and audio output automatically when a TV that
supports an automatic lipsync function is connected to the unit via HDMI.
If necessary, you can fine-adjust the audio output timing in “Adjustment”.
Manual
Select this option when you want to adjust the delay between video and audio
output manually.
Adjust the audio output timing in “Adjustment”.
