En
134
Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set
to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to
“Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
X
• When “Auto/Manual Select” is set to “Auto”, “Offset” shows the difference between automatic adjustment and
fine adjustment.
• This setting is also available in “Lipsync” (p.118) in the “Option” menu.
■
DSP Parameter
Selects the sound program to change the settings of the sound program.
DSP Level
Adjusts the sound field effect level. Higher to enhance the sound field effect, and lower to
reduce it.
Setting range
-6 dB to +3 dB
Y
• Available items vary depending on the selected sound program.
• To restore the default settings for the selected sound program, select “Reset”.
Initial Delay
Adjusts the delay between the direct sound and presence sound field generation.
Higher to enhance the delay effect, and lower to reduce it.
Setting range
1 ms to 99 ms
Y
• Available items vary depending on the selected sound program.
• To restore the default settings for the selected sound program, select “Reset”.
Room Size
Adjusts the broadening effect of the presence sound field.
Setting range
0.1 to 2.0 (higher to enhance the broadening effect)
Y
• Available items vary depending on the selected sound program.
• To restore the default settings for the selected sound program, select “Reset”.
Liveness
Adjusts the loss of the presence sound field.
Setting range
0 to 10 (higher to enhance the reflectivity)
Y
• Available items vary depending on the selected sound program.
• To restore the default settings for the selected sound program, select “Reset”.
Reverb Time
Adjusts the decay time of the rear reverberant sound. Higher to enrich the reverberant sound
and lower to have clear sound.
Setting range
1.0 s to 5.0 s
Y
• Available items vary depending on the selected sound program.
• To restore the default settings for the selected sound program, select “Reset”.
