27
English
This section explains how to set the speaker output levels using the test tone generator. The Dolby Surround test is for balancing the output
levels of the six speakers required for surround sound systems. The DSP test is for balancing the Front Effect speakers with the Main
speakers for the DSP sound field programs.
Before You Begin
1
1
Set
BASS
,
TREBLE
and
BALANCE
on the front panel to “0” (the
center position) and turn off
BASS EXTENSION
.
2
2
Sit in the main listening position and set
PARAMETER/SET
MENU
on the remote control to
PARAMETER
.
3
3
Set
10KEY/DSP
on the remote control to
DSP
and press
/ DTS
SUR
.
4
4
Press
TEST
on the remote control once or twice to select the test
you want.
• Select “TEST DOLBY SUR.” to match the output levels of the Center,
Rear Center and left and right Rear speakers to the left and right Main
speakers.
• Select “TEST DSP” to match the output levels of the Front Effect
speakers to the Main speakers.
Speaker Settings
The RX-V1 has seven SPEAKER SET items in the SET MENU that you must set according to the number of speakers in your configuration
and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings. If
the initial settings are not appropriate for your speaker configuration, change the settings in the SET MENU (see page 41).
Summary of SPEAKER SET items 1A through 1G.
Item
1A. CENTER SP
1B. MAIN SP
1C. REAR L/R SP
1D. REAR CT SP
1E. LFE/BASS OUT
1F. FRNT EFCT SP
1G. MAIN LEVEL
Description
Selects the Center channel output mode according to the size of the Center speaker.
The possible settings are LRG (large), SML (small) and NONE.
Selects the Main channel output mode according to the size of the Main speakers.
The possible settings are LARGE and SMALL.
Selects the Rear channel output mode according to the size of the Rear speakers.
The possible settings are LRG (large), SML (small) and NONE.
Selects the Rear center channel output according to the size of the Rear Center speaker.
The possible settings are LRG (large), SML (small) and NONE.
Selects a speaker for the LFE/Bass signal output.
The possible settings are SW (subwoofer), MAIN, and BOTH.
Selects the Front Effect signal output mode for the Front Effect signals.
The possible settings are YES and NONE.
Selects the output level for the Main channel signal.
The possible settings are Normal and –10 dB.
Initial Setting
LRG
LARGE
LRG
LRG
BOTH
YES
Normal
Speaker Output Levels
BASS
TREBLE
5
5
4
4
3
3
2
2
1
1
0
+
–
5
5
4
4
3
3
2
2
1
1
0
+
–
5
5
4
4
3
3
2
2
1
1
0
R
L
BALANCE
10KEY DSP
PARAMETER
SET MENU
