Yamaha RX-A2000 Owner'S Manual Download Page 156

Page: 156 / 195

156

APPENDIX

Troubleshooting

The Internet Radio

cannot be played.

The firewall of the network device

is activated. The Internet Radio

can be played only when it passes

through the port designated by

each radio station. The port

number is variable depending on

radio station.

Check the firewall setting of the network

device.

—

Connection to the Internet is

disconnected.

Check the configuration of the network

device, and then contact the network

connection provider.

—

Display

Cause

Remedy

See

page

Connect error

There is a problem with the signal

path from your network to this

unit.

Check the connection between this unit and

the LAN port on your router or hub.

Make sure your router is properly connected

and turned on. Also, make sure your modem

is properly connected and turned on when

you are attempting to listen to Internet

Radio.

Disconnected

Your USB storage device or USB

portable audio player has been

disconnected from the USB port of

this unit.

Check the connection between this unit and

your USB storage device or USB portable

audio player.

—

The PC server previously

connected to this unit no longer

exists.

Connect this unit to the available PC server.

No Device

There is a problem with the signal

path from your USB storage

device or USB portable audio

player to this unit.

Turn off this unit and reconnect your USB

storage device or USB portable audio player

to the USB port of this unit.

Try resetting your USB storage device or

USB portable audio player.

—

Problem

Cause

Remedy

See

page

Access error

This unit cannot access your USB

storage device or USB portable

audio player.

Try another USB storage device or USB

portable audio player.

—

There is a problem with the signal

path from your USB storage

device or USB portable audio

player to this unit.

Turn off this unit and reconnect your USB

storage device or USB portable audio player

to the USB port of this unit.

Try resetting your USB storage device or

USB portable audio player.

—

Access denied

The PC you are attempting to

connect has denied connection.

Configure the sharing setting of Window

Media Player 11/12 and select this unit as a

device to which music contents are shared.

Unable to play

This unit cannot play back the

songs currently stored on your PC.

Make sure Windows Media Player is

installed on your PC.

—

Check that the songs currently stored on

your PC are playable (MP3, WMA, MPEG-

4 AAC, and WAV).

—

Store some other playable music files (MP3,

WMA, MPEG-4 AAC, and WAV) on your

PC.

—

The network may be overloaded

with heavy traffic, and playback is

interrupted.

Try preparing a network exclusively for use

with this unit to separate it from general

network traffic.

—

List updated

The list of the contents stored on

your PC server has been updated.

—

Bookmark On

The desired Internet Radio station

has been added to the Bookmarks

list.

—

Bookmark Off

The stored Internet Radio station

has been removed from the

Bookmarks list.

—

USB Overloaded

Over current passes through the

connected USB device.

Turn off this unit and then disconnect the

USB device. If the message appears when

you connect the USB device again, this unit

may not compatible with the USB device.

—

Display

Cause

Remedy

See

page

Summary of Contents for RX-A2000




































































































































































































Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands

Yamaha RX-A2000, Owner'S Manual

Search results

Summary of Contents for RX-A2000

Reviews:

Related manuals for RX-A2000

Brands by name

Popular brands