6-10
ESU03502
Air filter
Always check that there is no snow under the air filter
element frame.
1. Unhook the air filter case cover fasteners and the
latch.
2. Remove the air filter case cover.
3. Lift up the air filter element frame and check the air
filter element. If there is any snow on the air filter ele-
ment, remove the element and brush off the snow,
and then install the air filter element.
4. Place the air filter element frame in its original posi-
tion, and then install the air filter case cover. Hook the
fasteners and the latch onto the air filter case cover.
NOTE:
@
After riding the snowmobile, make sure that there is no
snow under the air filter element frame.
@
ESU00110
Fittings and fasteners
Check the tightness of the fittings and fasteners.
Tighten in proper sequence and torque if necessary.
ESU00345
Tool kit and recommended equipment
It is good practice to carry the tool kit, spare parts, and
other necessary equipment with you while riding the
snowmobile so that minor repairs can be done if neces-
sary. The following should be carried at all times:
●
Tool kit
●
Flashlight
●
Roll of plastic tape
●
Steel wire
●
Towrope
●
Jumper cables
●
V-belt
●
Light bulbs
●
Spark plugs
When you start out for a long distance trip, extra fuel and
oil should be carried as well.
E_8es.book Page 10 Saturday, August 6, 2005 8:47 AM
