PRE-OPERATION CHECKS
4-3
4
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-28
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-17, 6-21
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-28
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-29
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-30
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-16
ITEM
CHECKS
PAGE
U5VN11E0.book Page 3 Tuesday, April 13, 2004 5:24 PM
Summary of Contents for ROAD STAN XV17AC
Page 1: ...5VN 28199 11 LIT 11626 18 15 XV17AT C XV17AWT C XV17AMT C XV17ATT C XV17ATMT C OWNER S MANUAL ...
Page 2: ...EAU10041 U5VN11E0 book Page 1 Tuesday April 13 2004 5 24 PM ...
Page 100: ...CONSUMER INFORMATION 9 8 9 U5VN11E0 book Page 8 Tuesday April 13 2004 5 24 PM ...
Page 105: ...PRINTED IN JAPAN 2004 04 1 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...
