Yamaha ROAD STAN XV17AC, Owner'S Manual

Page: 30 / 105

INSTRUMENT AND CONTROL FUNCTIONS
3-10
3
EAU13780
Locking the steering with a
padlock
In addition to the main switch/steering
lock, there are brackets on the right
side of the steering head pipe for lock-
ing the steering with a padlock. To do
so, turn the handlebar until the holes in
the two brackets are aligned, and then
lock the steering with a suitable pad-
lock.
EAU14151
Rider seat
To remove the rider seat
1. Insert the key into the main switch,
and then turn it counterclockwise
to “OPEN”.
NOTE:
Do not push inward when turning the
key.
2. Pull the rider seat off.
To install the rider seat
1. Insert the projection on the rear of
the rider seat into the seat holder
as shown, and then push the front
of the seat down to lock it in place.
2. Remove the key from the main
switch if the motorcycle will be left
unattended.
NOTE:
Make sure that the rider seat is properly
secured before riding.
1. Projection
2. Seat holder
U5VN11E0.book Page 10 Tuesday, April 13, 2004 5:24 PM