INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
EAU13120
Fuel tank cap
To remove the fuel tank cap
Slide the lock cover open, insert the key
into the lock, and then turn it 1/4 turn
clockwise. The lock will be released
and the fuel tank cap can be removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the “
” mark
facing forward.
2. Turn the key counterclockwise to
the original position, remove it, and
then close the lock cover.
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
WARNING
EWA10130
Make sure that the fuel tank cap is
properly installed before riding.
EAU13210
Fuel
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
WARNING
EWA10880
●
Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
●
Avoid spilling fuel on the hot en-
gine.
1. Fuel tank cap lock cover
2. “
” mark
3. Unlock.
4. Lock.
1. Fuel tank filler tube
2. Fuel level
U5VN11E0.book Page 7 Tuesday, April 13, 2004 5:24 PM
Summary of Contents for ROAD STAN XV17AC
Page 1: ...5VN 28199 11 LIT 11626 18 15 XV17AT C XV17AWT C XV17AMT C XV17ATT C XV17ATMT C OWNER S MANUAL ...
Page 2: ...EAU10041 U5VN11E0 book Page 1 Tuesday April 13 2004 5 24 PM ...
Page 100: ...CONSUMER INFORMATION 9 8 9 U5VN11E0 book Page 8 Tuesday April 13 2004 5 24 PM ...
Page 105: ...PRINTED IN JAPAN 2004 04 1 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...