Pre-Flight Inspection Items
3-6
3 Malfunction Area Indicator
An indicator will illuminate or flash if a malfunction is discovered on the helicopter while a configuration or a
flight is in progress.
The malfunction areas indicated here cannot be handled by the user. Contact your dealer to describe the
symbol for the light that has turned ON or is flashing, and request a repair.
Once one of these indicator lights illuminates, it will continue to illuminate or flash until the main switch is
turned OFF.
Slide servo thermo sensor
The slide servo thermo sensor indicates the temperature state of the slide servo motor.
It will flash when the temperature rises abnormally, or when a malfunction is detected in the thermo sensor.
* It may be difficult to see the LED under direct sun light.
If the temperature of the slide servo has risen, the LED will return to the ON state once the temperature
drops after time has passed. If the thermo sensor has a malfunction, it will continue to flash.
Indication
State
Meaning
Action
ON
Normal state
Flashing
(Alternates repeat-
edly between ON for
1 second and OFF
for 1 second)
The slide servo temperature
has risen, causing an abnor-
mal state. The malfunction
areas indicated here cannot
be handled by the user.
Contact your dealer immediately
to notify which LED is flashing (L/
B/R), and request a repair.
Intermittent flashing
(Alternates repeat-
edly between 0.1
second of ON and
1.9 second of OFF)
The thermo sensor has a
malfunction. The malfunc-
tion areas indicated here
cannot be handled by the
user.
Contact your dealer immediately
to notify which LED is intermit-
tently flashing (L/B/R), and
request a repair.
YACS Warning Light
GPS Indicator Light
RMAX.book Page 6 Tuesday, January 17, 2012 3:06 PM
Summary of Contents for RMAX Type II G Unit
Page 4: ......
Page 22: ...Part Names 2 5 ...
Page 40: ...Pre Flight Inspection Items 3 17 ...
