Yamaha RMAX Type II G Unit, Operation Manual

Page: 80 / 82

Flying Procedure
5-11
Landing
After hovering the helicopter over the landing point,
gradually lower the throttle stick to land it.
After landing, turns the GPS control switch OFF.
Engine Stopping
1
After the engine speed has lowered, press down
the Engine Stop switch on the transmitter until
the engine comes to a complete stop.
2
Press the Rotor Brake switch.
3 Before turning OFF the main switch of the heli-
copter, check the self monitor
’ s check point indi-
cator and the malfunction area indicator lights for
any illumination or flashing.
Landing and Engine Stopping
Never allow anyone to approach within 20 m
of the helicopter.
If the engine speed does not lower within 3
seconds after landing, turn the YACS control
switch OFF. This will lower the engine speed
to idle.
DANGER
TIP
Throttle Stick
Never approach (or allow others to approach)
within 20 m of the helicopter until the main
rotor has come to a complete stop and the
engine has stopped. Entering within 20 m of
the helicopter could cause a serious acci-
dent.
●
Do not press the Engine Stop switch
before the engine speed has dropped.
●
The rotor brake will not apply unless the
throttle stick is placed in the slowest posi-
tion.
DANGER
TIP
1
2
RMAX.book Page 11 Tuesday, January 17, 2012 3:06 PM