Yamaha Revolabs FLX2 System Manual Download Page 47 | Manualshive

Page: 47 / 74

background image

47

3. On the Dialer, browse to the Pairing menu: Menu



Setup



Advanced Setup



Pairing.

4. Select SPK 1 (Speaker 1) and press the ‘Enter’ or ‘Pair’

key to enter pairing state.

5. The screen will display ‘Pairing Speaker 1’.
6. Press and hold the button on the bottom of the Speaker

until the LED turns solid red. The speaker is now in
pairing mode.

7. After a short time an overlay will appear on the FLX

Dialer saying ‘Pairing Successful’, after which the
screen should read ‘SPK 1 Linked’.

8. If pairing was unsuccessful, the Speaker will show an

alternating red -green slow blinking sequence indicating
that the pairing failed. The Dialer will display a ‘Pairing
Timeout’ message. In that case the pairing procedure
should be repeated.

Microphone

1. To pair a Microphone, turn off the Microphone by holding the mute button until

the LED turns red if it is not already turned off.

2. Ensure that the Base Station is plugged in and powered up.
3. On the Dialer, browse to the Pairing menu: Menu



Setup



Advanced Setup



Pairing.

4. Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the ‘Enter’ key

to enter pairing state.

5. The screen will display ‘Pairing Mic 1’ or ‘Pairing Mic 2’ depending on which

Microphone you are pairing.

6. Press the mute button on the Microphone and hold it until the LED turns solid

red. The Microphone is now in pairing mode.

7. After a short time an overlay will appear on the Dialer ‘Pairing Successful’, after

that the screen should read ‘MIC 1 Linked’ or ‘MIC 2 Linked’, based on which one
you were pairing.

9. If pairing was unsuccessful, the Microphone will show an alternating red - green

slow blink sequence, indicating that the pairing failed. The Dialer will display a
‘Pairing Timeout’ message. In that case the pairing procedure should be
repeated.

LED Pairing Indicators:

Speaker Indicator

Status

Steady Red

Speaker is in Pairing Mode, either waiting or pairing in progress

Slow red- green flash

Pairing failed or timed out

Green flash

Pairing successful

Microphone Indicator

Status

Steady Red

Pairing Mode, either waiting or pairing in progress

Slow red – green flash

Pairing failed or timed out

Green flash

Pairing successful

«
...
45
46
47
48
49
...
»

Summary of Contents for Revolabs FLX2











































































Reviews:

No comments

Related manuals for Revolabs FLX2

Brand: JBL Pages: 24

Brand: YASKAWA SIEMENS Pages: 373

Brand: Panasonic Pages: 16

Brand: A-T Controls Pages: 19

Brand: Fusion Pages: 4

Brand: Kaye Pages: 168

Brand: Ricatech Pages: 64

Brand: Forge Electronics Pages: 10

Brand: Vicon Pages: 91

Brand: AudioBahn Pages: 15

Brand: Riello Pages: 12

Brand: Aiwa Pages: 58

Brand: Vaillant Pages: 32

Brand: BeingHD Pages: 31

Brand: EKOVENT Pages: 5

Brand: CYPRES Pages: 17

Brand: Itouchless Pages: 4

2010 Powerdrive IDS

Brand: Cabrinha Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands