Yamaha Revolabs FLX2 System Manual Download Page 45

Page: 45 / 74

Admin Settings

The Admin Settings menu allows changing settings that are
related to general system settings.

Setting System Name

1. Go to Menu



Setup



Advanced Setup



Admin Settings



Set System Name.

2. Change the current System Name to the new

name, and press Enter.

Reset Defaults

1. Go to Menu



Setup



Advanced Setup



Admin Settings



Reset Defaults.

2. Resetting defaults will revert back to factory

defaults. Pairing of devices, recent calls, stored
contacts, and the system name are not affected
by this.

NOTE: Beside other values, ‘Reset Defaults’ will reset the
administrative password to the factory default (7386).

Set Password

1. Browse to the Set Password menu: Menu



Setup



Advanced Setup



Admin Settings



Set

Password.

2. Set the password to an admin specified password.

Note that setting this password will override the
default password, so do not lose the new
password.

Log Out Admin

1. Browse to Log Out Admin: Menu



Setup



Advanced Setup



Admin Settings



Log Out

Admin.

2. Once logged out, the user will have to retype the

admin password to enter the administrative menus
again. If the user leaves the administrative menus
without logging out, an automatic log-out will
happen after about 15 minutes.

Summary of Contents for Revolabs FLX2











































































Search results

Summary of Contents for Revolabs FLX2

Reviews:

Related manuals for Revolabs FLX2

Brands by name

Popular brands

Yamaha Revolabs FLX2, System Manual

Search results

Summary of Contents for Revolabs FLX2

Reviews:

Related manuals for Revolabs FLX2

Brands by name

Popular brands