Yamaha Revolabs FLX2 System Manual Download Page 28

Page: 28 / 74

Viewing Device Details

1. Go to the Menu



Bluetooth. Select ‘Device List’.

2. Select desired device and press the ‘Enter’ key or

the ‘Select’ key to view device details

3. Device Information screen is shown with device

name, address, BT version, and date/time the
device was first connected.

Removing a Device

1. Go to the Menu



Bluetooth. Select ‘Device List’.

2. Select desired device and press the ‘Enter’ key or the

‘Select’ key.

3. Press the ‘Option’ key
4. Select ‘Unpair’ in the Device Options menu, and press

‘Select’.

Accepting Device Connection Request

If the trust setting for a previously paired Bluetooth device is
set to ‘Ask’ and that device comes into range with the FLX2
System, a message will appear on the FLX Dialer.

1. Select ‘Yes’ to have the FLX2 System pair with the

Bluetooth device and be ready for use.

2. Select ‘No’ to have the FLX2 System ignore the

Bluetooth device until the next time it comes into
proximity of the FLX2 System.

Summary of Contents for Revolabs FLX2











































































Search results

Summary of Contents for Revolabs FLX2

Reviews:

Related manuals for Revolabs FLX2

Brands by name

Popular brands

Yamaha Revolabs FLX2, System Manual

Search results

Summary of Contents for Revolabs FLX2

Reviews:

Related manuals for Revolabs FLX2

Brands by name

Popular brands