8-25
8
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install the bolt and tighten it to the specified
torque.
6. Remove the purging bolt and the gasket.
1. Tailpipe
2. Tailpipe bolt
2
1
1. Tailpipe
2. Spark arrester
Tightening torque:
Tailpipe bolt:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
1
2
U1AS12E0.book Page 25 Wednesday, February 2, 2011 11:55 AM
Summary of Contents for Raptor YFM7RB
Page 60: ...7 1 7 EBU21132 RIDING YOUR ATV U1AS12E0 book Page 1 Wednesday February 2 2011 11 55 AM ...
Page 157: ......
Page 158: ......