background image

7-9

7

BE CAREFUL WHERE YOU RIDE

This ATV is designed for off-road use only.

WARNING! Paved surfaces may seriously af-
fect handling and control of the ATV, and may
cause the ATV to go out of control. Always
avoid paved surfaces, including sidewalks,
driveways, parking lots and streets.

 [EWB01511]

Do not ride on any public road, street, or highway.
Riding on public roads can result in collisions with
other vehicles. In many states it is illegal to operate

ATVs on public streets, roads and highways.

WARNING! Never operate this ATV on any pub-
lic street, road or highway, even a dirt or gravel
one. You could collide with another vehicle.

[EWB01031]

Know the terrain where you ride. Ride cautiously in
unfamiliar areas. Stay alert for holes, rocks, or
roots in the terrain, and other hidden hazards
which may cause the ATV to upset. 

WARNING!

The ATV could go out of control if you do not
have enough time to react to hidden rocks,
bumps, or holes. Go slowly and be extra care-

U1AS12E0.book  Page 9  Wednesday, February 2, 2011  11:55 AM

Summary of Contents for Raptor YFM7RB































































































































































Reviews: