Yamaha Raptor YFM7RB, Owner'S Manual, Page: 54 / 158

6-4
6
erly lubricated only when the engine is run-
ning. Inadequate lubrication may damage
the transmission.
● Always use the clutch when changing gears.
The engine, transmission and drive train are
not designed to withstand the shock of
forced shifting and can be damaged by shift-
ing without using the clutch.
EBU20501
Operating the reverse knob and driving
in reverse
WARNING
EWB00720
Improper operation in reverse could make you
hit an obstacle or even a person behind you,
resulting in serious injury. When you shift into
reverse, make sure there are no people or ob-
stacles behind you. When it is safe to proceed,
go slowly.
NOTICE
ECB00170
Before shifting, stop the ATV, otherwise the
transmission may be damaged.
1. Bring the ATV to a complete stop, apply the
clutch lever, and then shift the transmission
into first gear.
2. While applying the brake pedal, turn the re-
verse knob clockwise with your right hand.
3. Apply the clutch lever and shift the transmis-
sion into reverse by pressing down on the shift
pedal, and then release the reverse knob.
1. Reverse knob “REV”
2. Shift pedal
2
1
U1AS12E0.book Page 4 Wednesday, February 2, 2011 11:55 AM