6 - 4
DRIV
TROUBLESHOOTING
EBS00157
TROUBLESHOOTING CHART
When basic condition “a” and “b” exist, check the following points:
Check the wheel and hub nuts for tightness.
NO
Torque to specification.
(Refer to “FRONT AND REAR WHEELS” in
chapter 7.)
YES
Check the rear brake adjustment.
NO
Adjust per instructions.
(Refer to “ADJUSTING THE REAR BRAKE”
in chapter 3.)
YES
Check the rear axle. Feel for bearing dam-
age.
NO
Rear axle bearings and rear drive shaft
bearings are probably not damaged. Repeat
the test or remove the individual compo-
nents.
YES
Remove the rear axle. Check for axle bear-
ing damage.
YES Replace the rear axle bearing.
(Refer to “REAR AXLE/FINAL DRIVE
ASSEMBLY AND DRIVE SHAFT”.)
NO
Remove the drive shaft components.
