14
En
Connections
Connecting the network cable
Connect the unit to your router with a commercially-
available STP network cable (CAT-5 or higher straight
cable).
Note
Use an STP (Shielded Twisted Pair) cable to prevent
electromagnetic interference.
Preparing a wireless antenna
If you use a wireless network connection or a
Bluetooth
connection, erect the wireless antenna. For information on
how to connect the unit to a wireless network, see
“Connecting to network” (p. 15). For information on using
this unit with a
Bluetooth
device, see “Playing back music
via Bluetooth” (p. 32).
Notice
Do not apply excessive force on the wireless antenna. Doing so
may damage the antenna.
Connecting the power cord
After all the connections are complete, connect the
supplied power cord to this unit and then to an AC wall
outlet.
WARNING
(General model only)
Before connecting the power cord, make sure you set
VOLTAGE SELECTOR of this unit according to your
local voltage. Improper setting of VOLTAGE SELECTOR
may cause fire and damage to this unit.
Turning on the unit
Press
A
(power) on the front panel to turn on the unit.
•
A
SPEAKERS
NETWORK
AC IN
LAN
WAN
Network Attached
S
torage
(NA
S
)
Internet
Modem
Router
Network cable
PC
This unit (rear)
Mobile device
(such as iPhone)
(R-N803)
NETW
ORK
AC IN
VOLTAGE SELECTOR
110 –120 V
220 –240 V
To the AC wall outlet
with the power cord
A
(power)
