Yamaha PW50(A1) Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 74

background image

INTRODUCTION

EAU41074

Congratulations on your purchase of the Yamaha PW50(A1). This model is the result of Yamaha’s vast experience in the
production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and
reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable at
the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of the
motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10031

Please read this manual carefully and completely before operating this motorcycle.

WARNING

EWA14351

This motorcycle is designed and manufactured for off-road use only. It is illegal to operate this motorcycle on any
public street, road or highway. Such use is prohibited by law. This motorcycle complies with almost all state off-
highway noise level and spark arrester laws and regulations. Please check your local riding laws and regulations
before operating this motorcycle.

AN IMPORTANT SAFETY MESSAGE:

●

Read this manual carefully and completely before operating this motorcycle. Make sure you understand all instructions.

●

Pay close attention to the warning and notice labels on the motorcycle.

●

Never operate a motorcycle without proper training or instruction.

●

Weight of the rider should not exceed 25 kg (55 lb).

U5PG8AE0.book Page 1 Thursday, April 8, 2010 8:37 AM

«
...
3
4
5
6
7
...
»

Summary of Contents for PW50(A1)











































































Reviews:

No comments

Related manuals for PW50(A1)

Brand: Free Spirits Pages: 32

Brand: LSL Pages: 4

Brand: MSA Pages: 163

Brand: Yoshimura Pages: 3

Brand: Sharper Image Pages: 4

Brand: MadStad Engineering Pages: 8

Brand: Big Bike Parts Pages: 3

Brand: Shad Pages: 2

SYM JOYMAX 125 GTS '13

Brand: Shad Pages: 2

TOPMASTER Y0RX53ST

Brand: Shad Pages: 2

Brand: Shad Pages: 3

Brand: Shad Pages: 3

Brand: Shad Pages: 3

Brand: Shad Pages: 6

Brand: Shad Pages: 10

Brand: Chicago Electric Pages: 7

Brand: Chicago Electric Pages: 10

Brand: Shark Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands