Yamaha PW50(A1) Owner'S Manual Download Page 58

Page: 58 / 74

PERIODIC MAINTENANCE AND ADJUSTMENT

7-19

3. Remove the axle nut and washer.
4. Pull the wheel axle out, and then

remove the wheel.

EAU41031

To install the front wheel

1. Install the brake shoe plate into the

wheel hub as shown.

2. Lift the wheel up between the fork

legs.

TIP

Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.

3. Insert the wheel axle from the right

side.

4. Install the washer and axle nut,

and then tighten the axle nut to the
specified torque.

5. Connect the brake cable at the

wheel hub, and then install the
brake cable free play adjusting nut.

6. Adjust the brake lever free play.

(See page 7-14.)

7. Take the motorcycle off the center-

stand so that the front wheel is on
the ground.

1. Brake camshaft lever
2. Brake shoe plate

3. Washer

4. Axle nut
5. Brake cable

6. Brake lever free play adjusting nut

1. Wheel axle

1. Retainer

Tightening torque:

Axle nut:

40 Nm (4.0 m·kgf, 29 ft·lbf)

U5PG8AE0.book Page 19 Thursday, April 8, 2010 8:37 AM

Summary of Contents for PW50(A1)











































































Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands

Yamaha PW50(A1), Owner'S Manual

Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands