Yamaha PW50(A1) Owner'S Manual Download Page 59

Page: 59 / 74

PERIODIC MAINTENANCE AND ADJUSTMENT

7-20

8. Push down hard on the handlebar

several times to check for proper
fork operation.

EAU25080

Rear wheel

EAU41084

To remove the rear wheel

WARNING

EWA10821

To avoid injury, securely support the
vehicle so there is no danger of it
falling over.

1. Place the motorcycle on the cen-

terstand.

2. Remove the seat. (See page 4-7.)
3. Remove the muffler bolt and wash-

ers.

WARNING! Always let the

exhaust system cool prior to
touching exhaust components.

[EWA14581]

4. Slide the spring clamp down, and

then remove the muffler.

5. Remove the exhaust chamber bolt

and washers.

1. Muffler
2. Washer

3. Muffler bolt

4. Spring clamp

1. Exhaust chamber

2. Exhaust chamber bolt
3. Washer

1 2

U5PG8AE0.book Page 20 Thursday, April 8, 2010 8:37 AM

Summary of Contents for PW50(A1)











































































Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands

Yamaha PW50(A1), Owner'S Manual

Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands