Yamaha PW50(A1) Owner'S Manual Download Page 33

Page: 33 / 74

INSTRUMENT AND CONTROL FUNCTIONS

4-7

EAU13680

Kickstarter

To start the engine, fold out the kick-
starter lever, move it down lightly with
your foot until the gears engage, and
then push it down smoothly but force-
fully.

EAU40920

Seat

To remove the seat

1. Remove the mudguard by remov-

ing the bolts and washers.

2. Pull the seat off.

To install the seat

1. Insert the projection on the front of

the seat into the seat holder as
shown.

2. Place the seat in the original posi-

tion.

3. Install the mudguard by installing

the washers and bolts.

TIP

Make sure that the seat is properly se-
cured before riding.

1. Kickstarter

1. Bolt and washer

2. Mudguard

1. Seat holder
2. Projection

U5PG8AE0.book Page 7 Thursday, April 8, 2010 8:37 AM

Summary of Contents for PW50(A1)











































































Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands

Yamaha PW50(A1), Owner'S Manual

Search results

Summary of Contents for PW50(A1)

Reviews:

Related manuals for PW50(A1)

Brands by name

Popular brands