42
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The Mixing Console
EFFECT TYPE
The
EFFECT TYPE
display page includes two “sub pages” — the
TYPE
page and the
PARAMETER
page. Use the
TYPE
or
PARAMETER
LCD button to switch between these sub-pages.
■
TYPE LIST
...........................................................................................................................................................................................
■
EFFECT BLOCK & TYPE
.................................................
This window lists all 8 DSP processors (including Vocal Har-
mony) and the effect type currently assigned to each. Use the
corresponding LCD dials to select an effect block to which you
want to assign an effect type.
Use the TYPE LIST dials to assign a specific effect to the currently selected
EFFECT BLOCK
(above). Note that
the contents of the
TYPE LIST
may be different according to the selected
EFFECT BLOCK
. The “User” effects in
the
TYPE LIST
can be programmed as described in “USER SET”, below.
Parameter Page
To access the individual parameters for each effect, go to the
PARAMETER
page by pressing the
PARAMETER
LCD but-
ton.
■
BLOCK
................................................................................................
■
TYPE
......................................................................................................
These parameters duplicate the
EFFECT BLOCK
and
TYPE
parameters in the
TYPE
page, above. The currently selected
EFFECT BLOCK
and
EFFECT TYPE
appear near the top of the
display.
■
DSP3
..........................................................................................................................................................................................................
The DSP(3) block applies only to the AUTO ACCOMPANIMENT and SONG playback sound. Use the
DSP(3)
controls to set the effect depth for the corresponding parts.
■
DSP4-7
....................................................................................................................................................................................................
These controls only appear when the [MAIN PART] display is selected DSP blocks (4) through (7) apply to the R1,
R2, LEAD, and MIC parts, respectively. Use the
R1
,
R2
,
LEAD
, and
MIC
part controls to set the DSP depth as
required.
Type Page
The
TYPE
page allows you to assign individual effects to the
any of the PSR-8000’s effect (DSP) blocks.
