1 1
+
–
+
–
DELETE ALL TRACKS
‡
TopMeas=
4 LastMeas=
6
+
†
DELETE from
4 to
6
Execute
E5
DELETE ALL TRACKS
1
2
3
4
5
6
7
8
9
1
2
3
7
8
9
1
2
3
4
5
6
Measure 4 through 6 deleted.
Delete Measures 4 through 6.
Subsequent measures moved back.
Purpose:
Deletes the specified measure or range of measures from
all tracks (including the accompaniment track).
Procedure:
Use the [
<
] and [
>
] buttons to switch between the two
display screens, and the left or right [-] and [+] buttons in the
first display screen to specify the number of the first measure
in the range to be deleted (TopMeas) and the number of the
last measure in the range to be deleted (LastMeas).
Once the top and last measure numbers have been se-
lected, press the [+] button below “Execute” on the right side
of the second display screen to actually execute the delete
operation. “Sequencer Executing!” will appear on the lower
line of the display while the operation is in progress, and
“Completed!” will appear briefly when the operation has
finished.
Notes:
It’s important to remember that a delete operation affects
all tracks simultaneously, and that measures following the
deleted range are moved back to take the place of the deleted
measures. This differentiates the delete job from the erase
job (described later), which replaces data in the specified
range with rests.
Be careful when deleting measures that contain effect on/
off events — e.g. pitch bend, modulation, sustain, harmony,
etc. If, for example, you delete a measure that contains a
pitch bend off event, the pitch bend applied in a previous
measure will remain in effect until the next pitch bend event
is encountered.
The delete operation has no “undo” function, so be abso-
lutely sure you want to delete the selected material before
actually executing the delete operation.
The Sequencer
Summary of Contents for Portatone PSR-5700
Page 79: ......
