Yamaha Portatone PSR-5700, Advanced Features

Page: 48 / 79

48
[F5] Disk
●
Disk Error Messages
If an error is encountered when a disk operation is executed, one of the following error messages may appear:
“
Type Error or Unformat!
”
The disk in the drive has not been formatted or the disk is
the wrong type or has the wrong format.
“
Not Found File!
”
The disk does not contain any files saved by the user.
“
Write Protect on !
”
The disk write protect tab is in the write disable position.
“
Disk Error!
”
A data error has occurred during a save, delete, or format
operation.
“
Disk Full!
”
The floppy disk does not have enough remaining capacity
to carry out the specified operation.
“
Sample Data Disk!
”
You have attempted to perform a save, rename, delete,
format, or disk free area operation while the supplied data
disk is in the drive.
“
Style Disk!
”
You have attempted to perform a save, rename, delete,
format, or disk free area operation while a style disk or other
optional pre-recorded disk is in the drive.
“
Not Found Disk!
”
No disk in drive.
“
Bad File Name!
”
The file name is all spaces and cannot be recognized by
the PSR-5700.
“
Not Enough Memory!
”
Not enough memory to load the specified sequencer file
from disk.
Some of the error displays automatically revert to the pre-
vious display after a few seconds, while others require that
the [EXIT] button be pressed to exit from the error display.
If a damaged disk is used the data countdown during
FROM DISK or TO DISK operations may stop and the load
or save operation may get “hung up.” In this case, eject the
disk from the drive even though the DISK IN USE lamp may
be on. Discard the damaged disk.