manualshive.com logo in svg

Yamaha PortaTone PSR-4000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-4000 Owner'S Manual Download Page 99

95

Disk Operations

Delete File/Song

Deletes the specified song or user file from the disk.

Press the 

SONG

 LCD button to if the 

SONG

LIST

 is not showing in order to delete a song file, or

the 

USER  FILE

 LCD button if the 

USER  FILE

LIST

 is not showing in order to delete a user file.

Use the 

FILE

 or 

SONG

 LCD [

▲

/

▼

] controls to

select the file you want to delete. The name of the
selected file is displayed to the right of the file
number, and the size of the file appears to the right
of the file name in kilobytes (approximate).

The 

LISTEN

 LCD button which appears when

the 

SONG LIST

 is selected can be used to listen to

the currently selected song — press 

LISTEN

 again

to stop playback when done.

When the file to be deleted has been selected,

press the 

EXECUTE

 LCD button. The “OK to de-

lete? display will appear.

If you want to execute the delete operation press

the 

YES

 LCD button (or press the 

NO

 LCD button

to cancel the operation). “Don’t remove disk” will
appear while the file is being deleted.

NOTES

• Files deleted from disk can not be restored (there is no

“Undo” function), so be sure you’ve selected the right file
before actually executing the delete operation.

Summary of Contents for PortaTone PSR-4000






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands